Connecting an Ingenico device via Payment Engine Direct
Supported Devices
- Ingenico iSC Touch 480 Device page
- Ingenico iSC Touch 250 Device page
- Ingenico iPP 350 Device page
- Ingenico iPP 320 Device page
Step 1: Add a Source Key
A source key must be added first to connect your device. Go to ‘Settings’ from your side menu bar and then select ‘API Keys’ on the drop down menu. Click on "+Add API Key" to add a new source key. For more information on adding an API Key, refer to the API Keys section of the user guide.
Step 2: Register and Pair Device
After a source key has been generated, return to the Device Manager section under Settings. Click on the '+' button to add a new Device.The following screen will appear to register the device:
Enter the Device’s Name, select the Source Key from the drop down menu as shown below, and select the Terminal Type as Direct.
Please Note: Device name can contain letters, numbers, spaces, and dashes. All other characters will be filtered out.
Once the Device Name, Source Key, and Terminal Type have been selected, click on '+Register'. The Merchant Console will then generate a pairing code to pair your device to the Merchant Console.
The Ingenico device will then ask you to enter the pairing code (shown in the Merchant Console).
iSC Touch 480 Pairing Screen:
Once the pairing code has been entered, your device should be connected. In the Device Manager, the green icon in the top right of the box indicates that the device is connected.
Step 3: Device Options
Click on the device to view the device’s settings. The following page with the device’s information and options will appear:
iSC Touch 480:
Default Terminal Configuration Check the boxes to allow the device to accept the following types of payment: EMV, Debit MSR, and Contactless. Enable Tip Adjust to adjust the transaction to include tip after the transaction has been approved.
Settings In this section, you can set the Timeout period, Enable initializing transaction from device, Share Device, and edit the Source Key.